A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
We stock standard track sections for fast replacement rather than a temporary bend-back fix.
Full impact assessment covers track, brackets, and any panel damage from the same event.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
Track sections are checked for plumb and level, then adjusted and secured to the frame at the correct tolerance.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
When a roller jumps the track mid-cycle, we reset it, then check whether worn rollers or a bent track edge caused it.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
A track can only stay aligned if the brackets holding it are solid. We check and correct this on every off-track call.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Most off-track calls don't require a parts run thanks to a well-stocked van.
We check the track, rollers, and brackets together to find the root cause before quoting the fix.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Roller kept jumping the track every few days until they found the real cause, a bent bracket.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Storm debris jammed the track and bent it. Same-day repair got the door working again before dinner.”
Off-track issues typically trace back to hardware wear or a physical impact rather than opener problems.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
Cost depends on whether it's a simple realignment or a full track section replacement, confirmed as a flat price on-site.
Continuing to run an off-track door usually causes more damage to the track, rollers, and panel.
A straightforward realignment often takes under an hour; a full section replacement may take a bit longer.
Same-day dispatch, upfront pricing, and a written warranty on every visit.
☎ Call +1-831-293-1591From one side of Fort Worth to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Fort Worth, TX